Casio QT 6100 and Epson TM-T88iv

Support, Help & Advice Forum

Casio QT 6100 and Epson TM-T88iv

Postby Pigeonhead79 on Mon Feb 26, 2018 9:57 pm

Hi All,

I am new to EPOS systems and have been tasked with setting one up for our small club. I have the setup running but i get an E061 code constantly when trying to print. Unfortunately the previous owner initialised the machine before we purchased the package.

I've run the test sequence fro the printer this is fine and its currently in com 2 but still no life from the printer, it's like its just not visible to the till. I've re run the initialisation sequence and nothing shows in printer 1/2 or 3. Thanks fully I've got the till programmed how we want it to function its just this and then we are running.

Can anybody advise on how I can get the till and the printer to communicate, thanks for your help.

David
Pigeonhead79
 
Posts: 4
Joined: Mon Feb 26, 2018 9:49 pm

Re: Casio QT 6100 and Epson TM-T88iv

Postby maxwan on Wed Feb 28, 2018 11:13 pm

Hi , I don't have a machine handy , but if you back it up to a compact flash , then reset it holding the red reset , it should initialise and print the ipl version and software , go into the printer settings and copy them . Then install from backup and copy your settings to the machine ,
I think it should be something like 3001 on com 3 not to sure , I can have a look at mine when I am at work if you need


Sent from my iPad using Tapatalk
maxwan
 
Posts: 9
Joined: Thu Nov 26, 2015 11:30 am

Re: Casio QT 6100 and Epson TM-T88iv

Postby Pigeonhead79 on Sat Mar 03, 2018 1:39 pm

Thanks Maxwan,

Ive reset the machine after backing up but don't appear to be able to find my way to getting the printer settings you mentioned, can you help as its not printing anything when I check the system connection it has RS-232C Printer showing but I'm still getting the error code.

After initialisation its showing NO in the printer connection for 1/2/3 and slip printers. Any suggestions welcome as Im going round in circles, thanks.
Pigeonhead79
 
Posts: 4
Joined: Mon Feb 26, 2018 9:49 pm

Re: Casio QT 6100 and Epson TM-T88iv

Postby maxwan on Thu Mar 08, 2018 10:19 am

Sorry not replied , I'll do it on my machine and get back to you.

Sent from my HTC One_M8 using Tapatalk
maxwan
 
Posts: 9
Joined: Thu Nov 26, 2015 11:30 am

Re: Casio QT 6100 and Epson TM-T88iv

Postby maxwan on Sat Mar 10, 2018 3:29 pm

You need to go into mode 3 general features down to I/O parameters .and set printer to 3100. Put the printer cable on com 3 .

Sent from my HTC One_M8 using Tapatalk
maxwan
 
Posts: 9
Joined: Thu Nov 26, 2015 11:30 am

Re: Casio QT 6100 and Epson TM-T88iv

Postby Pigeonhead79 on Wed Mar 14, 2018 9:36 pm

Thanks that great the initialisation worked the third time, and I rebuilt the interface, once it was working.

Thanks for your help.
Pigeonhead79
 
Posts: 4
Joined: Mon Feb 26, 2018 9:49 pm


Return to Casio Cash Register Equipment

Who is online

Users browsing this forum: No registered users and 0 guests

cron

x