I'm currently working in a shop and the owners are away. The register was turned off over night upon turning on the powere the screen showed up with 0.0.0 now nothing will enter in the till and when I type in numbers all sorts of muscrllaneous figures show up. I'm guessing I need to do some sort of reset. I've gone thru the manual and tried turning on and off but nothing is happening. Help please!!!

REMOVE THE BATTERIES [BEHIND WHERE THE ROLLS SIT]
UNPLUG THE TILL FOR 30 SECONDS
POWER UP WHILE HOLDING DOWN THE JOURNAL FEED BUTTON
DECIMAL POINT SHOULD FLASH THEN THREE BEEPS THEN THE PRINTER SHOULD CYCLE.
REPLACE THE BATTERIES [IF AN "L" REMAINS ON THE LEFT HAND SIDE OF THE DISPLAY THE THREE AA BATTERIES ARE EXHAUSTED AND FRESH ONES SHOULD BE FITTED - THIS IS THE MOST LIKELY REASON FOR YOUR ORIGINAL PROBLEM]

ANY SPECIFIC PROGRAMMING IN TERMS OF KEYBOARD ALLOCATION OR DIGIT LIMIT WILL BE LOST BUT AT LEAST YOU WILL BE ABLE TO USE THE TILL

[DONT FORGET TO LOG ON BY ENTERING 1 INTO THE TOP RIGHT HAND BUTTON]

Before resetting. Try signing on. Press 1 then the cash # button in the top right corner
If that dont work then follow andys instructions. Let us know how you get on

_________________
all Donations to Peter@cgiepos.co.uk

cgi may be right - but not with 0.0.0 on the screen!
if it was 0.00 then perhaps
Merry Christmas