er3110 direct keys how to set to plu

whibbs · **Joined:** Sat Apr 17, 2010 8:34 pm **Posts:** 29

hi

how do i set plu to diecr buttons i progrmed th plu but nout sure how to sedt to direct buttons

wayne

porty · **Joined:** Wed Jul 06, 2011 8:28 pm **Posts:** 423

951 . X 'plu number' 'direct key' ST. TL to finish.

whibbs · **Joined:** Sat Apr 17, 2010 8:34 pm **Posts:** 29

have done that but when button is pressed it says (entry error)
any ideas

thanks wayne

porty · **Joined:** Wed Jul 06, 2011 8:28 pm **Posts:** 423

Was your till set with 80 plu's on the keyboard or more? The mrs will have taken the keyboard back to its original 80 preset and also the function keys are back to mrs. Where you put the clerks was where the refund button was.
Key positions for plu's starts at 1 which is next to the TL button and works up the columns.
Do this in pgm2 mode 229 . X 'key number' X 'plu number' ST then back to 'plu number' ST and so on. TL to finish.

whibbs · **Joined:** Sat Apr 17, 2010 8:34 pm **Posts:** 29

have tried that but the button now just bleeps ??

wayne

porty · **Joined:** Wed Jul 06, 2011 8:28 pm **Posts:** 423

What I'll do is scan the image of the 3110 keyboard after the reset has been done showing the key positions. I think your machine had the keyboard rearranged when it was last programmed so it now isn't matching up with your printed keyboard sheet.
As per your other post, are you going to change the battery in the machine you're programming?

whibbs · **Joined:** Sat Apr 17, 2010 8:34 pm **Posts:** 29

Have done battery

whibbs · **Joined:** Sat Apr 17, 2010 8:34 pm **Posts:** 29

Just to update the till has been master reset looking at layout sheet I have button 1 ia at the bottom left corner and my first direct button will be no 59 next to the total key my first plu will 101 last one 200 have set all plu names and amounts and Departments,
Done 229 .x 101 x 059 st tl but all the button does is bleep
To test the plu numbers I have set a plu function button and the items work fine do i need to do the 219 . X x st tl ?

Any ideas
Thanks
Wayne

porty · **Joined:** Wed Jul 06, 2011 8:28 pm **Posts:** 423

That is right for the key number positions.
You still need to do the 229. So key position 79 is the position for plu1. Thus 229 . X 079 X 1 ST then keep going up thus 80 ST 90 ST. TL once you've finished.
Sorry I'm a bit rusty, it's been a while since I did 3110s and even then I used software to program them.

whibbs · **Joined:** Sat Apr 17, 2010 8:34 pm **Posts:** 29

Ok but my first button Is next to the tl key no 59 not 79 ?

er3110 direct keys how to set to plu

Who is online