how to get tax on the reciept on SX-680

MRoessell · **Joined:** Fri May 28, 2010 9:19 am **Posts:** 7

Hello.

I Have a Towa SX-680 that i gave totaly reset.

I have programmed 1 department and 64 plu all in dept1 and I have set TAX1 to 25% but I can not get it to write down the VAT on reciept or at all cause it to write VAT at reciept .

please are there some who can help me

socheallaigh · **Posted:** Fri May 28, 2010 3:49 pm

Hi

If you want tax/vat to print on receipt you must program control flag settings on the register. These should be in owners manual.
The main flags which control tax are

flag 12 bit 4 (0=add-on tax 1 = vat)
flag 15 bit 5 (1= net tax on receipt)
flag 50 bit 1 (0 = add-on tax 1=vat)

I assume from your post that you are not using vat. In this case setting flag 15=1 may be all you need

MRoessell · **Joined:** Fri May 28, 2010 9:19 am **Posts:** 7

Hello, Flag 15 is a set of 8 bit, each bit has different options, which bit is it.

socheallaigh wrote:

Hi

If you want tax/vat to print on receipt you must program control flag settings on the register. These should be in owners manual.
The main flags which control tax are

flag 12 bit 4 (0=add-on tax 1 = vat)
flag 15 bit 5 (1= net tax on receipt)
flag 50 bit 1 (0 = add-on tax 1=vat)

I assume from your post that you are not using vat. In this case setting flag 15=1 may be all you need

socheallaigh · **Posted:** Mon Jun 07, 2010 12:45 pm

Each flag has 8 bits numbered 8 to 1 from right to left. Flag 15 bit 5 must be set to 1. Each flag must be programmed fully, so to program flag 15 you must enter 8 bits (just copy whatever is there changing bit 5)

MRoessell · **Joined:** Fri May 28, 2010 9:19 am **Posts:** 7

That dident do it.

How do I tell it that Dept1 have to use TAX1

socheallaigh wrote:

Each flag has 8 bits numbered 8 to 1 from right to left. Flag 15 bit 5 must be set to 1. Each flag must be programmed fully, so to program flag 15 you must enter 8 bits (just copy whatever is there changing bit 5)