I have a Casio Se-C2000. The till is used in a bar/pub. It has been programmed with +-100 PLUs and prices and names set for each. This is fine for working and quick registering of prices via the PLU codes. I would like to link these PLU codes to the 72 button keyboard of the till, so they register as PLUs and not as departments especially for cash up and stock take so that stock can be accounted for. I was able to do it previously and then did not use the machine for awhile. I thought i remembered how to do it but obviously i am doing something wrong (or not doing something).

I am sending in the manual to Eposwizard if this is of any help.

Any help would be appreciated.

Thanks,

Alex

Usually when I setup this till I use a different initialisation code which defaults the PLUs to the keyboard.

To change them,
TURN KEY TO PGM
ENTER 4
PRESS SUBTOTAL
ENTER X048 replacing X with the PLU number
PRESS WHERE YOU WANT THIS TO BE ASSIGNED
REPEAT WITH NEXT NUMBERS
PRESS SUBTOTAL WHEN FINISHED

Dave

_________________
Buy me a drink as a way of saying thanks :-)
Donations!

If it's not X048 then it might be 048XXXX e.g 0480001 for plu one

Can't remember which way round.

Dave

_________________
Buy me a drink as a way of saying thanks :-)
Donations!

Thanks very much!! Turned out the code was actually 063, not 048. 063 is for the Flat PLUs, and the X063 (X048) was the right way round, but everything else that you said was spot on. I really appreciate your help!

Thanks for this info but how do you setup flat PLU keys 73 through to 144 (i.e. menu 2 options)