problem with error code geller ex300

Please share any ideas or improvements for the site in here

problem with error code geller ex300

Postby gilltomp on Sun Jan 09, 2011 10:39 am

We have a Geller EX300. Getting an error message NO - CL when using PLU codes. I have Inistialized the till but have the same problem. Any Ideas?
gilltomp
 
Posts: 1
Joined: Sun Jan 09, 2011 10:35 am

Re: problem with error code geller ex300

Postby andy-the-diver on Fri Feb 25, 2011 12:26 am

only guessing but if nothing works - such as a no sale etc,
no cl could stand for no clerk?

look for button such as clerk# or cl1 cl2 cl3 or cashire# or employee# or a row of buttons such as A B D E H if you find a button ending in # enter a 1 into it and try again
for the letters, try just pressing one before the start of a sale.

I have to admit that i don't know thyese machines at all so could be sending you on a wild goose chase but i have been sorting out registers for over 30 years and the error looks familiar.

please post and let us know - right or wrong

good luck
Andy
andy-the-diver
 
Posts: 2250
Joined: Tue Sep 22, 2009 5:23 pm

Re: problem with error code geller ex300

Postby nigelthepelican on Fri Mar 25, 2016 2:07 pm

The only way we have found to resolve this is to reset the till completely.

Its in the user manual but if you havent got one there are lots of sites that try to sell you one. Dont buy one unless younhave a lot of reprogramming to do - just follow the startup procedure posted on the TOWA website

Alternatively here are the steps to reset:
Turn off the machine and unplug it
Turn the control lock key to P position.
Plug in the power code, holding down the C key.
It should reset.

To program the date: (still in P position)
Turn the control lock key to P position.
1 → X/Time → YY MM DD → Cash/Tend

To program time (still in P)
urn the control lock key to P position.
2 → X/Time → hh mm → Cash/Tend

If your decimals are missing (turn key to P)
press 1 press RA Press 2 Press Cash Tend
nigelthepelican
 
Posts: 1
Joined: Fri Mar 25, 2016 1:59 pm


Return to Comments & Suggestions

Who is online

Users browsing this forum: No registered users and 0 guests

cron

x