ms7 120 on rs232 to be converted to usb

Support, Help & Advice Forum

ms7 120 on rs232 to be converted to usb

Postby rav123 on Fri May 27, 2016 12:28 pm

To all

Much appreciated


I currently have a ms7120 scanner which is on a epos connected via rs232. I have unplugged the scanner only from the cable and connected it to a usb cable on a different till but the scanner will not pick up the barcode at all but does power up .

I have the setup manual with barcode but I am not sure which settings is required for it to work on usb or to even pick up the barcode


Any advise would be great.

Thank you
rav123
 
Posts: 7
Joined: Tue Mar 01, 2011 12:26 pm

Re: ms7 120 on rs232 to be converted to usb

Postby andy-the-diver on Mon Jul 04, 2016 12:16 am

I'm pretty sure that the scanners interface boards are different - you cant just plug an rs232 head into a usb cable [you will see on the scanner serial number label that it will be designated either usb or rs232] at very least, there will be jumpers inside the unit - but as its a precision setup of lasers lenses and mirrors - I certainly wouldn't recommend taking it apart to find out!

if its connected to a pos terminal, you should have a spare comms port.
andy-the-diver
 
Posts: 2222
Joined: Tue Sep 22, 2009 5:23 pm


Return to Touch Screen Hardware

Who is online

Users browsing this forum: No registered users and 0 guests

x