Omron RS4603

Support, Help & Advice Forum

Omron RS4603

Postby afswift on Mon Sep 29, 2014 7:00 pm

Hi,

I have just been given two Omron RS4603 cash registers which I wish to use in my pub.

Has anyone on here got a copy of the programming / user manual that they could e-mail to me?

Thanks in advance

Adam
afswift
 
Posts: 0
Joined: Mon Sep 29, 2014 6:34 pm

Re: Omron RS4603

Postby pubman on Sat Oct 04, 2014 4:30 pm

I am in exactly the same position, my RS4603's were here when I bought my pub last year.
All I have found out so far is how to change the VAT rate.

Key to Program
SubTotal 1234 NoSale, Enter program mode
26 @ XXXX SubTotal NoSale, Set VAT rate XXXX = VAT %
SubTotal 0000 NoSAle, Exit program mode
Key to REG

I need to access reports etc and turn on Journal print

All help appreciated
pubman
 
Posts: 3
Joined: Fri Oct 03, 2014 6:06 pm

Re: Omron RS4603

Postby andy-the-diver on Wed Oct 08, 2014 2:25 pm

the very best of luck to the pair of you!
not only are they as old as the hills but you also have to be a rocket scientist to understand the manual - should you be lucky enough to find one
guys......im all for saving a few bob
but in the long run you are investing in a total nightmare!!! [ive been a till engineer for 35years and i wouldn't take on one of these! !dunce ]
andy-the-diver
 
Posts: 2222
Joined: Tue Sep 22, 2009 5:23 pm

Re: Omron RS4603

Postby afswift on Thu Oct 09, 2014 1:09 pm

Thank you for the reply,

New tills bought!
afswift
 
Posts: 0
Joined: Mon Sep 29, 2014 6:34 pm

Re: Omron RS4603

Postby moonchester on Thu Jan 25, 2018 5:35 pm

The Omron RS46 range was a cracking bit of kit in the day, hence why large breweries and motorway service stations installed them. They were easy to fix, and easy to program once you understood the Omron principles of S and P mode. They were great machines.
The RS4603 was one of the last models from what I remember but would have been problematic if the ROM became corrupt and you did not have the facility to load the ROM back in using the specific Omron built FDK and the Rom on disk (That is as I remember it, but stand corrected)
moonchester
 
Posts: 2
Joined: Thu Jan 25, 2018 5:18 pm

Re: Omron RS4603

Postby pubman on Thu Feb 01, 2018 12:06 pm

Moonchester

Tills are still in daily use and so is the computer that came with them, they were installed by Greenalls Brewery (UK) back in 1995
The screws have fallen out of the display hinge on one till, can you remember if the top case is screwed or clipped together?.

PubMan
pubman
 
Posts: 3
Joined: Fri Oct 03, 2014 6:06 pm

Re: Omron RS4603

Postby joeepos on Wed May 30, 2018 9:25 am

Sorted Omrons and programmed them for years, any company like Omron who make medical equipment too in my book cant go wrong. Dont see many Casio or SPS life saving machines in hospital. thank God. I have still got Omrons out there 25 years old and still working.
joeepos
 
Posts: 4
Joined: Wed May 30, 2018 9:15 am

Re: Omron RS4603

Postby pubman on Sun Jul 01, 2018 2:58 pm

Good afternoon

I cannot seem to find what type of ribbon is fitted to my till printer (Omron PR60), and none of my usual contacts can find anything either.
The ribbon is getting rather faint as it is at least 5 years old now.

Does anyone happen to know the details of the printer ribbon?.

Thanks
pubman
 
Posts: 3
Joined: Fri Oct 03, 2014 6:06 pm

Re: Omron RS4603

Postby S1mon on Sun Jul 01, 2018 3:02 pm

Unavailable from this supplier, but the link will tell you what type of ribbon it should be

https://www.amazon.co.uk/6000-PR-60-Original-402-Ink-Cartridge-Pieces/dp/B005HGXXSI

To be honest, given the age of the machine, it may be that you won't find a source for them anymore.
S1mon
 
Posts: 670
Joined: Wed Apr 04, 2012 9:17 am

Re: Omron RS4603

Postby pubman on Sun Jul 01, 2018 3:16 pm

Hello S1mon

fastest reply ever I think.

your link suggests it is a BRS 402 and the picture looks exactly right.
As you say they may not be around anymore but at least I now know wht I am looking for.

Thanks again
pubman
 
Posts: 3
Joined: Fri Oct 03, 2014 6:06 pm


Return to Omron Cash Register Equipment

Who is online

Users browsing this forum: No registered users and 0 guests

x