Hi, I'm trying, badly, to change one of our UX43's, thanks to this forum finding a lot of info, but can't find a few bits:

1. Change the date & Time
2. Remove all sales data
3. Remove all PLU data. That is, remove all the items previously programmed into the till.
4. Change the name on some of the depts allocated to keys.

Think that's it for now. Any help greatly appreciated.

Steve

Hi There,

Here are a few answers for you:

Changing the Time:
1. Turn the key to the X position
2. Press 2
3. Press . (Decimal Point)
4. Enter the Time in the following format (HHMMSS)
5. Press X2

Changing the Date:
1. Turn the key to the X position
2. Press 1
3. Press . (Decimal Point)
4. Enter the Date in the following format (YYYYMMDD)
5. Press X2

Sales Data - Unfortunately I cannot give the codes out for this, it is not permitted on the forum.

Clearing PLUs - I can give you the code to clear these but it is opening a can of worms and leaving you with a lot to do, you might be best just renaming all your current PLUs?

Chaning keyboard PLU descriptions:
1. Turn the key to the SP position
2. Key in 202
3. Press X2
4. Enter the PLU number of the product you want to change
5. Press the . (Decimal Point) key
6. Key in the new description for this PLU using the alphanumeric keypad
7. Press ENTER or CASH to accept
8. Press CL
9. Repeat steps 4 to 8 for any other description changes
10. Press CL twice to finish and exit programming

I hope this helps

_________________
If you find me helpful, please consider rewarding me with a Donation by following the link at the top of the page.

Hi

Ive just done the 305 name change programme and cleared out and ive gone to change the price and the till just bleeps when i press the decimal point and same if i try to change anymore names and it also bleeps when i press the plu button for the item ive just changed. Any ideas what ive done wrong and how do i correct it the till is a ux43f


Cheers

by default, the Ux-43 [AND EVERY OTHER TILL I HAVE EVER EXPERIENCED IN 30 YEARS]
has 2 places of decimal - hence you don't need to use the decimal point for prices

Hi

Sorry i think i explained it wrong if i go to program a name or do a price i put in key to z then 305 x put the price in and then press decimal point its then when it bleeps also i noriced that the cash button has been replaced by a plu so if we press cash it just adds nuts instead of opening the draw ive no idea have ive done it

Cheers

David

305
x
plu number
.
1st price
x
2nd price
x
Clear
Clear


The only time the decimal point button is pressed is after entering the PLU number.

Hi

Yeah thats when its bleeping after putting in the plu number and pressing decimal. It was fine before i changed the majority of items but now just bleeps and wont go any further. Just hope i dont need a new till

Also how do i get the cash button back to cash as at the moment when you press it it just adds nuts

Cheers

David

I think i know the problem i have somehow caught 101 instead of 202 and programmed plu's onto the decimal point button and the cash button. Can I get them back to normal or will it need to be done via a computer program.

Thanks