Hi

We have just replaced our SX-7500 with a touch screen a DX-915.

It has arrived with the previous shops programming in it.

What is the proceedure to re-set and re-programme this machine.

regards

John

OK - i've taken the S key off another uniwell till we have and this works, so I can now at least turn the key to SP.

I have the standard engineering soft key but it does not work at SP. Anyone any ideas ?

Ayone any ideas how I can re-set this ?

The engineers code which you say you have is the same for all the high end Uniwell tills. As long as the key is in SP this should work.

_________________
If you like what I say, then why not buy me a pint using the Donations Button!

yup 25****55 works

er is posting the code in full still forbidden? - after all, uniwell are no more!

Uniwell UK are still going strong after being bought up a few months back!!

_________________
If you like what I say, then why not buy me a pint using the Donations Button!

is Ali still on support desk?

The famous Ali, he left last year before there collapse. They were all working part time for about a year. The Uniwell brand was taken on by Geller. A couple of the staff have been kept on but the office is in London.

_________________
If you like what I say, then why not buy me a pint using the Donations Button!

Thanks folks,
The key was not 25******18.
The key had been reset and an even higher level key was needed.
Friendly dealer supplied.
Now it has been re-set to 25********18.
Thanks

John

There is no such thing as a higher engineers code!

If your talking about the code that works in blind, this is completely different to the engineers code. This code is needed when clearing the flash or performing an emergency ram clear etc.

_________________
If you like what I say, then why not buy me a pint using the Donations Button!