Sps-520FT Screen wont turn off at Reg Off.

Support, Help & Advice Forum

Sps-520FT Screen wont turn off at Reg Off.

Postby AlRussell on Tue May 19, 2020 10:34 pm

I have picked up a Sps-520FT and apart from a failed back up battery in full working order except the touch screen wont turn off at Reg Off position. Rear screen goes off and keyboard becomes inactive suggesting key switch assembly is fine. Running firmware 1.17.
Screen is fully functional as is the till and programming.
Any clues ? Been thro the settings extensively.
I have 2 530s and another 520 with slightly newer firmware that do not carry this issue.
AlRussell
 
Posts: 2
Joined: Tue May 19, 2020 10:02 pm

Re: Sps-520FT Screen wont turn off at Reg Off.

Postby andy-the-diver on Thu May 21, 2020 2:35 pm

does it print?
(silly question i know - but these things kind of "queue" commands if you run out of paper)
if theres no paper in it, you may find it will suddenly burst into life once a roll is installed, the platen is closed firmly and the c button is pressed.
andy-the-diver
 
Posts: 2363
Joined: Tue Sep 22, 2009 5:23 pm

Re: Sps-520FT Screen wont turn off at Reg Off.

Postby AlRussell on Fri May 22, 2020 4:35 pm

Yes it all prints fine.
I've solved the issue.
The flexi ribbon between screen and board had an issue. The ends of the ribbon were slightly detached so not connecting properly. Carefully trimming and inserting carefully solved the issue completely.
AlRussell
 
Posts: 2
Joined: Tue May 19, 2020 10:02 pm

Re: Sps-520FT Screen wont turn off at Reg Off.

Postby andy-the-diver on Sat May 23, 2020 5:47 pm

well theres one to add to the memory banks lol Thanks for gettung back to us.
was it the fine brown one? or the more substantial white one?
andy-the-diver
 
Posts: 2363
Joined: Tue Sep 22, 2009 5:23 pm


Return to Sam4s Cash Register Equipment

Who is online

Users browsing this forum: No registered users and 0 guests

x