Xn905 boot failure

Support, Help & Advice Forum

Xn905 boot failure

Postby Corky on Thu Jul 18, 2019 4:33 pm

Hi Everyone

I am not experienced in tills - but I am helping friend try to get his beloved 905 XnCheckout working. Modle XSRA 51513

I can see it has a Windows CE sticker on the case.

On boot up it says disk boot failure.

Are their any download links for software to get this till back up an running?

Any help would be appreciated.

Thank you.
Corky
 
Posts: 2
Joined: Thu Jul 18, 2019 4:21 pm

Re: Xn905 boot failure

Postby S1mon on Thu Jul 18, 2019 4:36 pm

Good luck with that. The XNs use encrypted CF Cards (certainly in my experience of running them with ICR Touch), and that is about as fatal as it can get unless you have access to a source image for the cards.

Do you happen to know what software was running on it before it died?
S1mon
 
Posts: 772
Joined: Wed Apr 04, 2012 9:17 am

Re: Xn905 boot failure

Postby Corky on Thu Jul 18, 2019 4:40 pm

I have no idea what software it was running previously.

This is literally my first time looking at any pos till.

There is a little USB dongle. I inserted in to a lap top and it reports as a blutooth composite device. I had assumed it might be the pos application. Dead end though.
Corky
 
Posts: 2
Joined: Thu Jul 18, 2019 4:21 pm

Re: Xn905 boot failure

Postby S1mon on Thu Jul 18, 2019 5:05 pm

Upload a picture of the dongle onto an image sharing site and post the link here
S1mon
 
Posts: 772
Joined: Wed Apr 04, 2012 9:17 am


Return to Other Makes / Models

Who is online

Users browsing this forum: No registered users and 0 guests

cron

x